Product Summary
The LM211P is a differential comparator with strobes. The LM211P is designed to operate from a wide range of power-supply voltages, including ±15V supplies for operational amplifiers and 5V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. The LM211P is capable of driving lamps or relays and switching voltages up to 50V at 50mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+ or VCC–. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.
Parametrics
LM211P absolute maximum ratings: (1)Supply voltage: VCC+ (see Note 1): 18V; (2)VCC– (see Note 1):–18V; (3)VCC+ – VCC–: 36V; (4)Differential input voltage, VID (see Note 2):±30 V; (5)Input voltage, VI (either input, see Notes 1 and 3):±15 V; (6)Voltage from emitter output to VCC–: 30V; (7)Voltage from collector output to VCC–: 50V; (8)Duration of output short circuit (see Note 4): 10s; (9)Package thermal impedance, θJA (see Notes 5 and 6): 85℃/W; (10)Operating virtual junction temperature, TJ: 150℃; (11)Case temperature for 60 seconds: FK package: 260℃; (12)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: J or JG package: 300℃; (13)Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: D, P, PS, or PW package: 260℃; (14)Storage temperature range, Tstg:–65℃ to 150℃.
Features
LM211P features: (1)Fast Response Times; (2)Strobe Capability; (3)Maximum Input Bias Current: 300nA; (4)Maximum Input Offset Current: 70nA; (5)Can Operate From Single 5V Supply; (6)Available in Q-Temp Automotive; (7)High-Reliability Automotive Applications; (8)Configuration Control/Print Support; (9)Qualification to Automotive Standards.
Diagrams
Image | Part No | Mfg | Description | Pricing (USD) |
Quantity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
LM211P |
Texas Instruments |
Comparator ICs Single |
Data Sheet |
|
|
|||||||||||||
LM211PE4 |
Texas Instruments |
Comparator ICs Single Strobed Differential |
Data Sheet |
|
|
|||||||||||||
LM211PWE4 |
Texas Instruments |
Comparator ICs Single Strobed Differential |
Data Sheet |
|
|
|||||||||||||
LM211PWR |
Texas Instruments |
Comparator ICs Single Strobed Differential |
Data Sheet |
|
|
|||||||||||||
LM211PWRE4 |
Texas Instruments |
Comparator ICs Single Strobed Differential |
Data Sheet |
|
|
|||||||||||||
LM211PWRG4 |
Texas Instruments |
Comparator ICs Diff Comparator With Strobes |
Data Sheet |
|
|
|||||||||||||
LM211PWG4 |
Texas Instruments |
Comparator ICs Diff Comparator With Strobes |
Data Sheet |
|
|
|||||||||||||
LM211PW |
Texas Instruments |
Comparator ICs Single Strobed Differential |
Data Sheet |
|
|